top of page



How to Flash Alcatel 9015Q with MT6737m 6.0 Firmware: A Step-by-Step Guide

Alcatel 9015Q Flash File MT6737m 6.0 Tested Firmware

If you are looking for a way to flash your Alcatel 9015Q smartphone with the official stock ROM and bypass the FRP (Factory Reset Protection) lock, then you have come to the right place. In this article, we will show you how to download and install the Alcatel 9015Q flash file MT6737m 6.0 firmware on your device using the SP Flash Tool. This firmware is tested and verified by many users and it can fix various issues such as hang on logo, dead boot, LCD problem, FRP lock, camera problem, etc.

Alcatel 9015Q Flash File MT6737m 6.0 Tested | Firmware |

What is Alcatel 9015Q Flash File?

Alcatel 9015Q flash file is a file that contains the official stock ROM of the Alcatel 9015Q smartphone. It is also known as firmware or software update. The flash file has the operating system, kernel, bootloader, recovery, and other system files that are needed for the proper functioning of the device. The flash file can be used to upgrade or downgrade the device software, or to restore it to the factory settings.

Why do you need Alcatel 9015Q Flash File?

You may need Alcatel 9015Q flash file for various reasons. Some of them are:

  • To fix software issues such as hang on logo, boot loop, stuck at recovery mode, etc.

  • To bypass FRP lock or Google account verification after hard reset.

  • To unbrick or revive a dead device.

  • To remove malware or virus infection.

  • To improve the performance and stability of the device.

  • To add new features or remove unwanted apps.

How to download Alcatel 9015Q Flash File?

You can download Alcatel 9015Q flash file from the link given at the end of this article. The flash file is in a zip package, which contains the firmware file, flash tool, USB driver, and instruction manual. The firmware file name is MT6737M__alps__z702_32__z702_32__6.0__alps-mp-m0.mp1-V2.56.3_tpw8735b.3h. The firmware size is 882 MB. The firmware is based on Android 6.0 Marshmallow operating system and it is compatible with MediaTek MT6737M chipset. Before downloading the flash file, make sure you have enough storage space on your computer and a stable internet connection.

How to install Alcatel 9015Q Flash File?

To install Alcatel 9015Q flash file on your device, you need to use the SP Flash Tool. SP Flash Tool is a software application that allows you to flash or install firmware on MediaTek devices. You can download SP Flash Tool from the link given at the end of this article. To use SP Flash Tool, you also need to install MTK USB Driver on your computer. MTK USB Driver is a driver that enables your computer to recognize and communicate with your MediaTek device. You can download MTK USB Driver from the link given at the end of this article.

Once you have downloaded and extracted all the files, you can follow these steps to flash your device:

  • Open SP Flash Tool on your computer.

  • Click on Scatter Loading and select the scatter file from the flash file folder. The scatter file name is MT6737M_Android_scatter.txt.

  • Select Download Only from the drop-down menu.

  • Click on Download button in the SP Flash Tool to start flashing.

  • Power off your device and connect it to your computer using a good USB cable.

  • Wait until flashing is done and a green ring OK message will appear on the screen.

  • Disconnect your device and reboot it.

Congratulations! You have successfully flashed your Alcatel 9015Q with MT6737m 6.0 firmware and bypassed FRP lock.

What are the specifications of Alcatel 9015Q?

Alcatel 9015Q is a tablet-phone that was released in May 2017. It has a 7.0-inch IPS TFT display with a resolution of 1024 x 600 pixels and a pixel density of 170 ppi. It is powered by a MediaTek MT8735B chipset